FEW12 stops filling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › FEW12 stops filling

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 25, 2010 at 11:34 am #55446
    johnnyhoz
    Participant

    Had this one today the machine starts to fill then stops filling before pressure switch is activated, no fault lights come up.
    It drains, fills and spins manually, took the pressure pipe off but stops fiiling regardless

    Any ideas please

    John

    June 27, 2010 at 10:24 am #323693
    johnnyhoz
    Participant

    Re: FEW12 stops filling

    Module?

    June 27, 2010 at 3:49 pm #323694
    iadom
    Moderator

    Re: FEW12 stops filling

    It could be an O/C hot fill valve.

    Jim.

    June 28, 2010 at 10:58 pm #323695
    lasty
    Participant

    Re: FEW12 stops filling

    iadom wrote:It could be an O/C hot fill valve.

    Jim.

    I`d go for that as well Jim – had one yesterday , threw me for a while …. :rolls:

    June 29, 2010 at 6:32 am #323696
    timdowning
    Participant

    Re: FEW12 stops filling

    Has anyone disconnected the module wiring?

    Reversing the two wires that go to the very right hand connector, as you look at the machine, can give you this symptom.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.