- This topic has 2 replies, 3 voices, and was last updated 15 years, 9 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
recently replaced control computer which has been tested by FP and is reported as OK, but since then does not reach max revs on final spin.
Re: Fisher Payk GW 703-U, Product 93976, not spin at max rev
Hi rockbr
Moved you down to the Australian forum.
Don
If Smartdrive has been filled with hot water and has not had a cold rinse, Smartdrive will not spin up to
its full speed of 1000 RPM, its maximum speed will be reduced to 700 RPM. To remove this flag, enter
the Control Option mode and push the button beside the words HOT BOWL CLEAR, or put Smartdrive
through a complete final rinse.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.