Hotpoint WDL540P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WDL540P

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 4, 2010 at 2:25 pm #55625
    TheSpinDoctor
    Participant

    When start button pressed, door lock clicks rapidly 6 times & does nothing else. I assume the lock itself has failed but am wondering if anyone can confirm this.

    July 4, 2010 at 3:04 pm #324536
    iadom
    Moderator

    Re: Hotpoint WDL540P

    More likely to be the PCB but worth trying a doorlock first.

    July 4, 2010 at 3:09 pm #324537
    helo_75
    Participant

    erm, you might wanna test the motor, or try one to see if it works

    its very common fault that, theres a loose wire, or the toc is open circuit

    July 12, 2010 at 4:15 pm #324538
    TheSpinDoctor
    Participant

    Re: Hotpoint WDL540P

    Well, I fiited the lock & guess what? Same thing happened. I traced the wires back to a board on the back right of the appliance. I assume this is knackered. Are there any diagnostics, fault codes etc for this?

    July 12, 2010 at 4:48 pm #324539
    iadom
    Moderator

    Re: Hotpoint WDL540P

    Did you test the motor/wiring harness as suggested?

    All fault codes are in the error codes thread.

    December 2, 2014 at 11:59 pm #324540
    stourbridgear
    Participant

    Re: Hotpoint WDL540P

    Got same prob now, did you fix it??

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.