Idesit Wil163 Fabric Conditioner not dispensing

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Idesit Wil163 Fabric Conditioner not dispensing

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 6, 2010 at 10:19 am #55668
    richard3009
    Participant

    Fabric Conditioner not dispensing, what solenoid part number do I need, I assume that’s what it is.

    July 6, 2010 at 10:29 am #324701
    iadom
    Moderator

    Re: Idesit Wil163 Fabric Conditioner not dispensing

    A competent engineer would never ‘assume’ anything. 😉

    He or she would first test the said valve with a suitable megger or multimeter.

    Is there any water actually coming into the fabric conditioner compartment, have you looked up inside the drawer compartment to see if it is gunged up with algae and bacteria etc ?

    It might just need a good clean.

    July 6, 2010 at 10:52 am #324702
    richard3009
    Participant

    Re: Idesit Wil163 Fabric Conditioner not dispensing

    drawer is clear, what reading resistance should i get from the solenoid, Im just getting organised in case I do need the part as all good engineers should. 😀

    July 6, 2010 at 12:01 pm #324703
    iadom
    Moderator

    Re: Idesit Wil163 Fabric Conditioner not dispensing

    No exact figures given but most fill valves are just under 4000Ω.

    Not the easiest valves to get at, also may be two types, a single or a double.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.