- This topic has 5 replies, 5 voices, and was last updated 15 years, 9 months ago by
.
-
Posts
-
ok, have a WD440P, customer says kid was pushing in all the buttons randomly, now all thats its doing is lighting the power light, and flashing the time saver light like crazy. Cant switch it off via the on/off button, cant cancel anything, machine doesnt take water or anything else, like its not got a program set, customer has unplugged it for a day and still the same. Kinda thinking its got confused or stuck in the test/programing mode, any ideas ?????
Re: hotpoint WD440P very strange problem
I would take off the front PCB and check for sticking or broken buttons first..
Give the kid a swift clip round the ear if you get a chance as well. 😆
Re: hotpoint WD440P very strange problem
Had one like this the other day… PCB had become unseated
George
Re: hotpoint WD440P very strange problem
Thanks so far.
Have tried all the above ( apart from the clip round the ear 😛 )
everything looks ok, buttons are fine, not stuck, pcb is seated properly, was wondering if its gone faulty itself and the kid is just a co-incedence, poss main pcb gone faulty ????
- You must be logged in to reply to this topic.