- This topic has 3 replies, 3 voices, and was last updated 15 years, 9 months ago by
.
-
Posts
-
I have this w/m which is driving me mad. The door wont close. It seems as if the hook doesn’t go into the door interlock far enough to click.
I tried bending the hinge, still no good. I took off the door seal and it still wont click closed.Do I change the door trim, the hinge, the interlock, the latch kit, or all of them? But they all look fine. Any one have this before. Thanks
Re: Servis M6713W washer
Have you taken the door apart? It’s likely to be the pin which holds the latch mechanism together. This often works out of position and just slipping it back (with a bit of adhesive to stop it coming out again) is all that’s required.
GrahamRe: Servis M6713W washer
sometimes if your customer is a bit heavy handed, the outer door trim can slip over the inner trim causing the pecker to not quite reach the door lock usually a little pull on the outer trim will make it click back into position.
You will be able to see at a glance if this is the case as the door handle will not be sitting flush to the trim.
- You must be logged in to reply to this topic.