Beko WMA10W wont pick up into full spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA10W wont pick up into full spin

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 14, 2010 at 4:07 pm #55840
    nelson
    Participant

    Hello chaps,

    Anyone help with this? Machine runs fine through the whole program but when it reaches the spin will not pick up into a fast spin.

    July 14, 2010 at 7:57 pm #325309
    neilsukwg
    Participant

    Re: Beko WMA10W wont pick up into full spin

    I don’t know if you been to this machine yet but the obvious possible answers are
    out of balance load
    Pump resrtriction

    July 14, 2010 at 10:34 pm #325310
    Galway
    Participant

    Re: Beko WMA10W wont pick up into full spin

    i think i had a similar problem but it was the customer using the fast wash with to big a load and it would not spin.

    July 15, 2010 at 7:36 am #325311
    nelson
    Participant

    Re: Beko WMA10W wont pick up into full spin

    My partner (not that kind 😆 ) has been out to it and couldn’t find anything obvious, ie draining problems, carbons etc.

    I’m thinking possibly timer fault.

    Thanks for the replies though 😉

    July 15, 2010 at 10:12 am #325312
    A1_Domestics
    Participant

    Re: Beko WMA10W wont pick up into full spin

    Possible slack belt?

    July 15, 2010 at 10:15 am #325313
    Tubs
    Participant

    Re: Beko WMA10W wont pick up into full spin

    Have changed 3/4 timers on beko’s for same fault.

    Steve

    July 16, 2010 at 8:46 pm #325314
    Allsorts
    Participant

    Re: Beko WMA10W wont pick up into full spin

    Got a Beko WMA150w with the same fault… just changed the tacho on the motor and it is now fine.

    George

    July 16, 2010 at 8:52 pm #325315
    cornwell40
    Participant

    Re: Beko WMA10W wont pick up into full spin

    Had a couple recently, one was starting to fill as it spun and the other intermittently just didn’t spin at all. Both module faults

    TC

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.