Hotpoint WF210T error?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF210T error?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 15, 2010 at 12:07 pm #55860
    Martin
    Participant

    Ist LED flashes and Start LED. 😕

    Motor OK, Heater OK, Pump OK. Fills, washes, heats and drains out but won’t spin. Select spin only and again the 1st LED flashes slowly with the Start LED flashing even faster.

    Don’t know much about these m/c’s other than I think the WF in the model number means What the Fuff? maybe?

    Any advice on what’s wrong or how far I should throw it would be most appreciated…TNKS! 😀

    July 15, 2010 at 4:59 pm #325373
    iadom
    Moderator

    Re: Hotpoint WF210T error?

    Looks like the dreaded eight flash job. 😥

    Error codes 😉

    Jim.

    July 16, 2010 at 7:15 am #325374
    Martin
    Participant

    Re: Hotpoint WF210T error?

    iadom wrote:Looks like the dreaded eight flash job. 😥

    That’s what I initially thought but being as the heater operates as normal during a wash cycle that seemed to me to suggest otherwise. I’ve quoted to return and fit a new board anyway and I suspect the machines incarceration into a skip will take place this coming weekend, all being well!

    Thanks for your info Jim. 😉

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.