Good evening all,
Wondering if anyone can help with the above problem.
Customer complained of fan oven not warming up, so I tested the usual suspect (element) which was open circuit.
The fan works, spins freely and quietely.
Therefore, I R&R the element and switched the fan oven on… all o.k for about 1 minute, then oven tripped out. Element warming up nicely prior to tripping.
Re-set above, and tried again. Tripped out immediately.
Oven does not trip when element disconnected, so wondering if there is an underlying fault.
I don’t have much experience in this area, and any assistance would be appreciated.
Regards,
jontymox