Bosch WFK 2801.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WFK 2801.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • June 8, 2004 at 9:53 pm #5605
    ChrisR
    Participant

    Hi guys. 😀

    I`ve got some strange problems on this one.

    The delay timer will not go above 18 minutes.
    The reset procedure will not reset.
    Any programme selected will only start on rinse.
    What ever I do it will not reset.

    I`ve allowed the delay timer to count down but still nothing happens.

    Is it the main module suspended above the tub and if so,how much are they?.

    Any help much appreciated.

    Chris.

    June 8, 2004 at 10:38 pm #112112
    sparkey
    Participant

    Re: Bosch WFK 2801.

    Sounds like the main module, part number 26 3909, retail price inc vat = £173.18. from http://www.bshappliancecare.co.uk

    June 9, 2004 at 7:39 am #112113
    Martin
    Participant

    Re: Bosch WFK 2801.

    Chris,

    This seems illogical I know but disconnect the connections to the double valve, then try resetting. A high resistance in one valve coil can cause similar symptoms (= new valve) 😉

    Martin

    June 9, 2004 at 11:05 pm #112114
    sparkey
    Participant

    Re: Bosch WFK 2801.

    Martin wrote

    This seems illogical I know but disconnect the connections to the double valve, then try resetting. A high resistance in one valve coil can cause similar symptoms

    New one on me Chris, lets us know if sucessfull
    Sparkey

    June 10, 2004 at 7:01 am #112115
    Martin
    Participant

    Re: Bosch WFK 2801.

    One more thought Chris,

    These machine are prone to air chamber blockages and heaters shorting? But I guess you have already checked that possibility 😉

    The only time I have changed a Module is when the motor has blown it up!

    Martin

    June 10, 2004 at 7:56 pm #112116
    Kentish
    Participant

    Re: Bosch WFK 2801.

    Have you run its diagnostic program? If so what did the last fault listed show?

    As for these power boards… I have replaced quite a few. The early ones were quite weak whereas the newer ones are better.

    June 10, 2004 at 8:20 pm #112117
    ChrisR
    Participant

    Re: Bosch WFK 2801.

    Thanks for all the input guys.

    I`m due back on site next week.

    As regards the diagnostic programme,how do I run that?.

    Chris.

    June 10, 2004 at 11:50 pm #112118
    sparkey
    Participant

    Re: Bosch WFK 2801.

    The reset procedure will not reset.

    Generally speaking all Bosch electronics will reset by turning selector to X and pressing start button.
    Programme will then restart until panel detects fault when it then trips again.
    If it will not reset then its 99.99999999999999{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} panel fault

    June 11, 2004 at 9:17 pm #112119
    Kentish
    Participant

    Re: Bosch WFK 2801.

    To put the machine in diagnostic mode.. make sure all buttons unlit, and dials to off m(selection).Press the prewash button and the start buttons and turn on the machine. To set it to a test programme, turn selector switch to requred setting and press start.

    When you first activate the diagnostic mode
    you should get a number displayed in the 7 segment display, this will be the last recorded fault. If you can get that then I can help you with the fault indicator (as have access to quickfinder)

    June 12, 2004 at 11:37 am #112120
    ChrisR
    Participant

    Re: Bosch WFK 2801.

    Thanks kentish for that.

    This machine has no seven segment display only the lcd for the timer countdown.

    Am I missing something here?.

    Chris.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.