- This topic has 2 replies, 3 voices, and was last updated 15 years, 8 months ago by
.
-
Posts
-
Dishwasher has been unused for at least 6 months
the power in my house tripped out a couple of times.
then we tried to use the dishwasher.it rinses ok….and finishes
but any other program doesnt ever finishit starts as normal.
the detergent door opens.
then it hits a loop…….
i can hear it sloshing the water around inside then after 70 seconds it stops, beeps twice then starts again for another 70 seconds……..stops, beeps twice then starts again for another 70 seconds……..stops, beeps twice then starts again for another 70 seconds
you get the idea.it does heat the water
it also gave an error code the first time :
1 2 3 all flashing , 4 off , 5 permanently onafter powering off and then on it gave me 4 5 both flashing.
i have done the reset procedure but it is still looping
any body recognise those error codes? or the looping?
Re: Teka DW6 59 FI ONE MINUTE LOOP
Hi Russ, did you ever find the solution to this problem? I’ve have the exact same problem.
Rinse program works fine.
The rest of the programs start ok, water goes in, sloshes around for 10-15 mins, then something clicks, 2 beeps and then it does this every 70 seconds or so.
I’ve tried resetting the dishwasher by pressing the program button 4 times in 3 seconds as soon as its switched on & then powering off & on. This has no effect on the problem.
Any help would be greatly appreciated.
- You must be logged in to reply to this topic.