- This topic has 7 replies, 4 voices, and was last updated 15 years, 8 months ago by
.
-
Posts
-
Hi guys
this machine starts ok but after about 45 secs ,the water check led comes on,but still fills with water,then the flood device comes in and pumps out.
I think it may be that white impellor sensor next to the water valve.
any ideas
cheersRe: Bosch SGS53C12UK4/01
adv wrote:sounds like it. 😆
I’ll second my mate John on that but do also be sure no leaks are apparent onto the baseplate. 😉
Re: Bosch SGS53C12UK4/01
Many thanks,yep checked baseplate,and thats bone dry.will fit said part see if that does the trick :
Re: Bosch SGS53C12UK4/01
Make sure to put new one back exactly as old one was. Apparently they don’t like being in any other position or orientation.
Mike.Re: Bosch SGS53C12UK4/01
Job done ,works perfectly.
i did notice with the faulty item that the bearing in the impellor was quite noisy,and possibly baulking when it spun up.giving a faulty reading ,got another one to go to next week,looks like itmight be a common problem me thinks.thanks to all for info
- You must be logged in to reply to this topic.