- This topic has 8 replies, 2 voices, and was last updated 15 years, 8 months ago by
.
-
Posts
-
This looks like it could be 20/25 years old. Pressure switch rubber diaphragm has rotted.
It’s a simple old-fashioned Eaton 2 level job (11/12/13 21/22/23).
I have cut off the metal edge clamp which holds it all together and am thinking of replacing the diaphragm with one from another p/sw of same type. But I think I’ve thrown out all the old p/switches I once had.
If anyone has an old Eaton with metal clamp as used in old Hotpoint / Hoover etc. I’d be happy to take it off your hands and wouldn’t charge you an awful lot. 😆 2-level preferred as plastic actuator on inside of diaphragm should be same.
Servis 412 dishwasher. Servis part no. would be 40008300 = 520001000 = 520001001 (using Mediator and Masterpart).
NLA @ Connect and POA @ Masterpart (and I doubt I’d like the price much if they could find it!).
Mike.Re: Looking for an old Eaton p/sw 2-level w. metal edge clam
Still nothing? Does this mean everyone has thrown them out?
Mike.Re: Looking for an old Eaton p/sw 2-level w. metal edge clam
Sorry Mike, missed this the other day. 😳
Just had a root around and have found one, a two level job as well. 😀PM me your address and I will get it off to you.
Jim.
Re: Looking for an old Eaton p/sw 2-level w. metal edge clam
Patience, Grasshopper :lol:.
Yes Jim, it arrived the other day. Thanks for the rapid despatch. It’s perfect for the job. I’ve removed the diaphragm and placed it into the dishwasher switch and it should be fine. I can’t clamp it back together till I’m back at the job because I didn’t record the orientation and don’t want to end up stretching wires. I was waiting till job done to report. Should be sometime during coming week; a (very interesting author) chap living alone so not too desperately urgent. Actually, I don’t do anything desperately urgent – it’s something to do with the air down here :lol:.
Mike.Re: Looking for an old Eaton p/sw 2-level w. metal edge clam
All went back in today. Used a large jubilee clip round the old metal surround to hold it all firmly back together. Working great now. Machine should be good for another 10 years at least.
Mike.Re: Looking for an old Eaton p/sw 2-level w. metal edge clam
:tup: 8)
My invoice will be in the post… 😆
Glad it helped.
Jim.
- You must be logged in to reply to this topic.