- This topic has 1 reply, 2 voices, and was last updated 15 years, 8 months ago by
.
-
Posts
-
Hi all
I had the high tempreture problem with my fridge freezer (high temps on both), so got the 2 sensors from here and fitted them, also cleaned out the bottom grills and left for 24 hrs to defrost.
All worked fine for the last few weeks now i have the same problem back again, is there asnything else i could try ?
Update on this i left the fast freeze on overnight to see if it helped any but nothing so have just removed the bottom back panel and the tank is hot to touch but i can hold my hand on it just and no noise from it and also the fan is not moving.
Thanks
Robert
Re: Hotpoint Mistral replaced both thermistors now what
Firstly if the compressor (motor) is working the fan next to it should also be working otherwise the fridge will not get down to correct temperature. If the compressor is too hot its either because the fan is faulty, it is short of refrigerant or the compressor is duff. First thing to do is to get the fan working and take it from there.
- You must be logged in to reply to this topic.