whirlpool awod 4305

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool awod 4305

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 31, 2010 at 5:40 pm #56202
    bmrenr
    Participant

    Hi does anyone have error codes for above m/c .The rinse,anticrease,spin,and service lights are on and m/c has stopped

    Tom

    August 1, 2010 at 12:01 am #326528
    aqualectric
    Participant

    Re: whirlpool awod 4305

    If a Whirlpool just locks the door and stops, check the motor brushes.

    Steve.

    August 1, 2010 at 10:34 am #326529
    bmrenr
    Participant

    Re: whirlpool awod 4305

    Thanks Steve but the customer said this stopped mid cycle.I have checked the known error codes but all I can find are codes for m/cs with digital display.The lights that are on are from left to right are 3,4,5 and the service light.This call is over thirty miles away so if I knew what this code was I could take the part with me rather than making two trips.Any ideas guys? email is tght@eircom.net if someone has the error codes

    Tom.

    August 1, 2010 at 11:32 pm #326530
    leavemetogetonwithit
    Participant

    Re: whirlpool awod 4305

    Seem to remember an open circuit heater giving rise to a “not start” machine for me. Don’t remember what lights were on or off.
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.