- This topic has 2 replies, 2 voices, and was last updated 15 years, 8 months ago by
.
-
Posts
-
I have an Arrow fan oven with a Gunkol element.Over tthe last couple of weeks it seemed as if the thermostat wasn’t working,then the other night dinner was cooking when the electricity blew! I retripped the consumer unit and everything came back on.After a few moments I noticed that the oven was cold ( fan working normally ).Grill still works.
I removed the cooker unit from the housing a stripped the thing down.From the pics on the web site my element appears undamaged,but I have no continuity between the terminals,does this mean the element is kaput?Also,
how can I check the thermostat is working?How does the interior light come out?Re: Arrow Fan Oven
If you have no circuit between the element terminals then its faulty.
The interior light cover will either be a screw thread glass cover or twist fit.
They can be tight to undo, suggest using a pair of marigolds to get a good grip to remove.
Make sure you isolate befor carring out any work ❗
HTH
StevenRe: Arrow Fan Oven
Steven wrote:If you have no circuit between the element terminals then its faulty.
The interior light cover will either be a screw thread glass cover or twist fit.
They can be tight to undo, suggest using a pair of marigolds to get a good grip to remove.
Make sure you isolate befor carring out any work ❗
HTH
StevenHi Steven
Many thanks for your info….. didn’t have any marigolds but determination and brute force! has done it.
Element and lamp now on order – soon will have a roast – whooppee! (fingers crossed).
Pedro46
- You must be logged in to reply to this topic.