- This topic has 3 replies, 2 voices, and was last updated 15 years, 8 months ago by
.
-
Posts
-
How big a job is this. Is it a drum out or is it a matter removing the cast iron bearing housing assy from the rear?
Is there a bearing and seal kit avaiable?
Jim.
Re: Bosch WFF147S GB/01 bearing change
iadom wrote:How big a job is this.
A walk in the park Jim, cast iron spigot off the back and knock ’em out!
iadom wrote:Is there a bearing and seal kit avaiable?
Gen = 093907 Qualtex = BKT77
HTH? 😀
Re: Bosch WFF147S GB/01 bearing change
Many thanks Martin. :tup:
Did I get the model number correct, 😉 😆Jim.
Re: Bosch WFF147S GB/01 bearing change
Martin wrote:
A walk in the park Jim,
Unfortunately not quite… 😥
The machine is in a garage and you all know what bearing failures are like on machines in garages. 😉
Main bearing had completely collapsed. I was very lucky indeed as I was able to remove the inner core of the main bearing from the drum shaft and using my trusty Hotpoint (Red box ) bearing kit managed to get the outer part of the old bearing out of the housing, so alls well that ends well. 8)
Must sat I’m surprised they use such tiny bearings in these machines.
Jim.
- You must be logged in to reply to this topic.