Hotpoint WF220

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF220

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 5, 2010 at 8:44 am #56322
    Mr66MARTIN
    Participant

    I have a problem with a hotpoint aqaurius WF220. when put on spin-It spins for say 5 seconds it does this 3 times then stops.both on/off & rinse hold flash
    together-it wont turn off.It has to be unplugged. Anyone help-Thanks

    August 5, 2010 at 9:47 am #326918
    iadom
    Moderator

    Re: Repair

    Moved you to correct forum.

    The ‘Known Error Codes’ thread at the top of this forum should be your first point of reference. 😉

    Look HERE

    Fault is F02, motor jammed or tacho fault, I would be looking for broken wiring near the motor plug first.

    Welcome to the forums BTW. 8)

    Jim.

    August 26, 2010 at 10:47 am #326919
    Mr66MARTIN
    Participant

    Re: Hotpoint WF220

    Thanks for that. Turned out to be the PCB at faulty.Had it reconned.Works great now.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.