AEG dishwasher F44070 all pump.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG dishwasher F44070 all pump.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 9, 2010 at 5:18 pm #56399
    delahart
    Participant

    Hi,
    Struggling with this one.
    Prod 911235209 pumps all the time. Base switch is fine as is pressure switch, so thought must be board so fitted new module. Same result. NTC reads about right resistance, no shorts in loom that I can see. Pump supply seems to be straight from board and thinking might be flood switch disconnected but that results in a warning tone so pretty certain not that!
    Any ideas gratefully received.
    Del.

    August 9, 2010 at 6:39 pm #327251
    iadom
    Moderator

    Re: AEG dishwasher F44070 all pump.

    Moved you to correct forum on the ‘TRADE’ side. 😉

    August 9, 2010 at 7:59 pm #327252
    delahart
    Participant

    Re: AEG dishwasher F44070 all pump.

    Thanks, always forget to note which forum its heading for.
    Del.

    August 9, 2010 at 9:33 pm #327253
    leavemetogetonwithit
    Participant

    Re: AEG dishwasher F44070 all pump.

    Closest model no. I can find info for is F44080 via Connect mediator. Manuals seem to be slow downloading, lots of colour pics. There are two pressure switches apparently, including one described as an “anti-overflow”.
    Can send basic manual if you give your e-mail address via PM. That’s private message not D.Cameron.
    Mike.

    August 23, 2010 at 11:15 am #327254
    delahart
    Participant

    Re: AEG dishwasher F44070 all pump.

    Hi all,
    Just thought I should post the answer to problem.
    Heater was leaky, but not all the time, great. However new heater cured, but not until I had already bought and fitted new board.
    delahart.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.