- This topic has 3 replies, 3 voices, and was last updated 15 years, 8 months ago by
.
-
Posts
-
Don’t really do dishwashers, but agreed to look at this for a good customer,base is flooded but i don’t know why?
No obvious leaks but fill matrix thingy on side looks a bit blocked, I’d be gratefull for any pointers on this, thanks in advance.
Allan.Re: Hotpoint DF62
Bosch based machine, access to the innards is very restricted and often involves a major strip down to access.
The main leaks I have encountered are main circulation pump, seals on top of the heater box, tiny pin holes in the inner tub next to the salt filler cap amongst others.
I once had one with hairline split in the heater box, took me ages to track it down. 😥
Re: Hotpoint DF62
Drain off water & dry as best you can.
Clean matrix / tube.Then with the sides still off give it a whirl & watch.
You may find it dosen’t leak & was due to tablet (doubling up on rinse aid) used or customer opening door during cycle.
- You must be logged in to reply to this topic.