Diplomat Dishwasher ADP8224

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat Dishwasher ADP8224

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • June 16, 2004 at 2:28 pm #5650
    admin
    Keymaster

    Many thanks for the advice given earlier on the E9 and E2 error codes. I didn’t feel confident about doing the dismantling of the machine and cleaning of the side fill chamber so I got an engineer in to have a look. He said it was the side fill chamber but said it was a sealed unit and would therefore have to be replaced (I hadn’t mentioned the advice already received). He has since come back and said that Diplomat no longer make these units and that my machine is now obsolete!!!

    Any further advice or help available out there?

    June 16, 2004 at 2:33 pm #112632
    kwatt
    Keymaster

    No it is still available, part number KIT22LTEC and, as suggested, is a kit that is listed at £45.41 excl VAT from MFI. It is not obsolete.

    K.

    June 16, 2004 at 2:40 pm #112633
    admin
    Keymaster

    Re: Diplomat Dishwasher ADP8224

    Thank you so much for your quick response. I will get back to the engineer before he invoices me for the original callout!! 😀

    June 16, 2004 at 3:10 pm #112634
    admin
    Keymaster

    Re: Diplomat Dishwasher ADP8224

    I have just spoken to the company and they said that because they don’t have an account with MFI they cannot order the part but will fit it if I get it. Using my somewhat limited internet skills I have been unable to find either the MFI contact or a supplier.

    Any suggestions?

    June 16, 2004 at 3:10 pm #112635
    admin
    Keymaster

    Re: Diplomat Dishwasher ADP8224

    I have just spoken to the company and they said that because they don’t have an account with MFI they cannot order the part but will fit it if I get it. Using my somewhat limited internet skills I have been unable to find either the MFI contact or a supplier.

    Any suggestions?

    June 16, 2004 at 3:32 pm #112636
    kwatt
    Keymaster

    Carol,

    Dave should be able to order one up for you no problem. I don’t have one is stock (which is a tad unusual actually) but Dave may have one there anyway.

    You can email Dave using spares@ukwhitegoods.co.uk and the price should be as quoted plus carriage and VAT obviously.

    K.

    June 16, 2004 at 3:43 pm #112637
    Dave_Conway
    Participant

    Re: Diplomat Dishwasher ADP8224

    Yep, no problem.

    With VAT and carriage added it will be £58.85, I don’t have one in stock though so will take 3-5 working days to arrive here, and then another couple of days to get to you.

    Why didn’t I just say about a week in the first place 😕 😆

    Dave.

    June 18, 2004 at 7:29 am #112638
    admin
    Keymaster

    Anyone had these symptoms, first 3 lights flashing 4 th off 5th on ?

    This occurs after machine appears to run thro the start up seq hear water in /out but inside of machine dry? Runs 4 about 3 mins then error light s up.

    June 18, 2004 at 7:42 am #112639
    Dave_Conway
    Participant

    JOHN M wrote:Anyone had these symptoms, first 3 lights flashing 4 th off 5th on ?

    John, could you post the model number please, the thread title is ADP8224 which doesn’t have the same display type you refer to.

    Thanks.

    Dave.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.