- This topic has 1 reply, 2 voices, and was last updated 15 years, 7 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
the machine is 2 years old
the program start the motor do one hard cycle
with all the power like no tacho
and then stops and the rinse flashing
the motor is o.k
the pcb sent to fixing but the fault is the same
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.