Whirlpool AWO10761 F27

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Whirlpool AWO10761 F27

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 18, 2010 at 1:03 pm #56620
    cassman
    Participant

    Hello,

    can anyone help with listings of the fault codes for this machine.

    My wife had this Fault code and then had problems opening the door.

    I have since been able to reset but now even on a spin cycle the machine locks the door – indicator on and then the drain pump runs for a while. Then a pause followed by another run of the drain pump and then the machine freezes with no fault code – just the door locked LED flashing.

    I have checked all the drain hoses and even ran the drain pump without the filter in. I see the drain pump turning but still won’t continue the program.

    August 18, 2010 at 6:10 pm #328142
    cassman
    Participant

    Re: Whirlpool AWO10761 F27

    just spoke to mrs again. No fault code, the machine just stopped at 27 minutes with the door locked LED flashing

    August 19, 2010 at 12:31 pm #328143
    odom
    Participant

    Re: Whirlpool AWO10761 F27

    Try cleaning the pressure chamber and checking pressure switch.

    September 2, 2010 at 9:56 am #328144
    BODERS
    Participant

    Re: Whirlpool AWO10761 F27

    there is no listing of f27 for that machine but i would say have you check the brushes on motor

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.