Zanussi zwd1681w.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi zwd1681w.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • August 24, 2010 at 7:53 am #56748
    DRH
    Participant

    This washer is dead,power into main pcb.It has had a new pcb but is still dead. Door inter lock is o/k. gone through with mega and all seems ok? Any help please!!!!! 🙁

    August 24, 2010 at 7:57 am #328696
    Martin
    Participant

    Re: Zanussi zwd1681w.

    What’s the ribbon connections like to the display board?

    August 24, 2010 at 8:30 am #328697
    DRH
    Participant

    Re: Zanussi zwd1681w.

    no ribbon connections off display pcb. just wires to selector switch and three off to main pcb..this job was started by somebody else. so god knows :rolls:

    August 24, 2010 at 8:42 am #328698
    electrofix
    Moderator

    Re: Zanussi zwd1681w.

    diag i have got shows 2 ribbons off display board 1 goes to connector J8 on main pcb

    if you want service info let me have your email


    Dave

    August 24, 2010 at 4:03 pm #328699
    DRH
    Participant

    Re: Zanussi zwd1681w.

    yes please. all the help i can get.

    August 24, 2010 at 6:31 pm #328700
    electrofix
    Moderator

    Re: Zanussi zwd1681w.

    done check you email

    Dave

    August 25, 2010 at 2:42 pm #328701
    DRH
    Participant

    Re: Zanussi zwd1681w.

    job done!!!!. many thanks. 😀

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.