AEG L16830 washer dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG L16830 washer dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 31, 2010 at 1:15 pm #56897
    chezza
    Participant

    p6359599 prod 914602122/01 .
    customer says it shows E20 , though was running without error when I called ; however, getting live both side of each heater , and strangely after a few mins , 180volts … though 240 present at terminalblock . fan runs ok ( starts after min or so, i guess after flushing ? ) and stats not tripped or o/c but no heat. guessing thermistor, but are there any common probs i may have missed ?
    wash rinse and spin all ok, but apparently dryer has been problematic from day 1 .
    thanks in advance , eddie

    August 31, 2010 at 3:15 pm #329211
    Martin
    Participant

    Re: AEG L16830 washer dryer

    E20 is either a duff triple valve or a clogged condenser unit or BOTH!

    Also check the wires to the NTC at the bottom hose of that condenser assembly. 😉

    August 31, 2010 at 3:36 pm #329212
    chezza
    Participant

    Re: AEG L16830 washer dryer

    Thanks martin , valve was ok , and dont think condensor was at fault either , as no heat from the off , but i will check when i return and hope for the best with the ntc wires .
    😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.