- This topic has 1 reply, 2 voices, and was last updated 15 years, 7 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Re: Hotpoint Tumble Dryer TDC970P
Do you mean a TCD970P. 😉
F07= Lower element failure.
• Check security of module connector J4;
• Test between pins 4 and 3 on J4 (approximately 48 Ohms);
• If open circuit, test lower element and wiring between J4 and
the heater.They are they same as THESE
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.