Hotpoint WF100P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF100P

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 4, 2010 at 10:02 am #57002
    A1TEC
    Participant

    Got this machine from a mate for reconning.
    Switch on at socket and on/off lamp lights up, then wash enhance light flashes, press start and door lock lamp lights up, then press start again and door lock lamp gose out and nothing happens after that. 😥

    Any help appreciated guy’s, also a service manual would be handy. 😉 email JM6302@YMAIL.COM

    cheers

    John.

    September 4, 2010 at 10:25 am #329518
    Martin
    Participant

    Re: Hotpoint WF100P

    Why are you pressing the start button TWICE? 😕

    September 4, 2010 at 10:34 am #329519
    A1TEC
    Participant

    Re: Hotpoint WF100P

    Because nothing happens the first time 😆

    September 4, 2010 at 10:44 am #329520
    Martin
    Participant

    Re: Hotpoint WF100P

    Perhaps you need to thump it…….only joking..:martin:

    OK so at least we know it turns on and off again and the door locks, so there’s some life going on in there. Now, this “wash enhance” LED? Which one is that in numerical order, top to bottom so the speak? Is in LED no 1? The dreaded F08 error code? 🙁

    Check that LED flashing with the known error codes as I’ve got a ‘orrible feeling about this one. 😈

    September 4, 2010 at 11:05 am #329521
    A1TEC
    Participant

    Re: Hotpoint WF100P

    Top led/ number 1 🙁
    Looks like a board job then.

    September 4, 2010 at 11:11 am #329522
    Martin
    Participant

    Re: Hotpoint WF100P

    A1TEC wrote:Got this machine from a mate for reconning.

    Some mate he turned out to be eh? 😈

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.