What’s next? APL8224/1 with issues!!

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › What’s next? APL8224/1 with issues!!

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 14, 2010 at 9:32 am #57226
    HairyMalteser
    Participant

    Hi Everyone,

    You have very kindly helped me in the past with repairs to another dishwasher and other white goods, so I was hoping that you might be able to help me again…

    I have inherited an Hygena APL8224/1 which has worked relatively well over the last year, but has now stopped taking in water.

    I have replaced the solenoid inlet valve and removed and checked the pipes running between various parts of the washer but to no avail. The machine works perfectly if I put a bucket of water inside at the correct parts of the cycle, but stops as soon as the element gets too hot from lack of water. Is there a water sensor which could be at fault or is more likely to be the ECU? How can I test with a meter to find the problem please?

    Thanks for your time

    Mark

    September 15, 2010 at 6:13 pm #330302
    clivejameson
    Participant

    Re: What’s next? APL8224/1 with issues!!

    The most likely cause is either the float in the left-hand side chamber sticking or more likely the wiring harness has broken in the door…

    September 16, 2010 at 9:23 am #330303
    HairyMalteser
    Participant

    Re: What’s next? APL8224/1 with issues!!

    Thanks Clive,

    I’ll check those out over the weekend

    Mark 🙂

    September 21, 2010 at 8:58 am #330304
    HairyMalteser
    Participant

    Re: What’s next? APL8224/1 with issues!!

    Brilliant!

    Thanks Clive, you are a star. It was indeed the cable. Replaced it yesterday and we have a perfectly working machine again.

    Thank you so much. 😀

    Best wishes

    Mark

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.