Belling XOU90MF

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Belling XOU90MF

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 15, 2010 at 5:11 pm #57271
    Toni
    Participant

    Hi
    Fault on this is it keeps cutting out then comes back on again after a while,
    I pulled it out & the cooling fan just turns very slowly with a humming noise, so ordered a cooling fan
    Went back to fit it today and the new one does exactly the same,
    Would it be a faulty fan or is there something else anyone knows about on this model?

    September 15, 2010 at 5:44 pm #330453
    electrofix
    Moderator

    Re: Belling XOU90MF

    had a similar prob on a tricity cooker years ago were the stat was generating heat when current was passed through it so trips out
    worth checking

    you could short out stat wires
    turn on cooker and use a multimeter to see if stat trips
    if it doesn’t you have found it

    Dave

    September 15, 2010 at 5:46 pm #330454
    Allsorts
    Participant

    Re: Belling XOU90MF

    I have a different model doing the same thing… On this one it is the control knob, must be getting warm inside the knob and then cutting the power to the oven light, element and fan.. after a few minutes all will come on again.

    George

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.