Electrolux commercial dishwasher wt38 uk, Reprogramming prob

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Electrolux commercial dishwasher wt38 uk, Reprogramming prob

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 18, 2010 at 11:19 am #57320
    mikewillner
    Participant

    HELP!! We brought one of these monsters in to repair motor but when we delivered back a splash of water damaged the pcb. We have now replaced that and received 30 pages of instructions to program pcb for this particular model. We can only get one program to run very long but there should be another two shorter programs. Any advice would be very ,very welcome.
    Cheers Mike – Moston lane appliances 0161 681 1622
    A fine bottle of wine/single malt to the one who solves this one!!

    September 20, 2010 at 5:18 pm #330606
    A1TEC
    Participant

    Re: Electrolux commercial dishwasher wt38 uk, Reprogramming

    These are a pain to set up same board does a host of machines, you need to tell the board which machine you have.
    Follow all the set up procedure and make sure the perameters are as per the instructions.
    Try that and see if it works.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.