creda simplicity w100fw drum bearings

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › creda simplicity w100fw drum bearings

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 25, 2010 at 8:51 am #57477
    clockworkone
    Participant

    call out for mon on this one. not one ive done previously so any info appreciated ie solid drum or spider.also any tech info appreciated.p

    September 25, 2010 at 10:48 am #331184
    electrofix
    Moderator

    Re: creda simplicity w1000fw drum bearings

    this is the standard old hotpoint design great machine to work on

    front comes off machine
    remove font of drum leave outer drum in situe

    pulley threaded onto spider and locked with 30mm nut

    spider and bearing available very cheaply

    can do repair after experience in about 75 minutes


    Dave

    September 25, 2010 at 12:34 pm #331185
    clockworkone
    Participant

    Re: creda simplicity w100fw drum bearings

    thanks very much dave,its a bit of a trek to this one and trying to avoid a return visit. paul

    September 25, 2010 at 12:58 pm #331186
    electrofix
    Moderator

    Re: creda simplicity w100fw drum bearings

    if bearings gone badly can rub on heater and destroy it

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.