Indesit W123

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit W123

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 2, 2004 at 4:11 pm #5749
    Toni
    Participant

    Hi
    I have this machine where the door gasket is rubbing on the inner drum,
    There is no movement on the drum & the bearings seem to be ok
    Any Ideas ? will changing the gasket do the job.?
    I have the call booked for monday so any help would be very welcome

    Regards
    Toni

    July 2, 2004 at 4:26 pm #113487
    Martin
    Participant

    Re: Indesit W123

    This is possibly a tricky one to sort Toni 😉 only in as much as it (as you probably know) has a complete s/steel tub/drum assy that cannot be sorted but can only be replaced. 🙁 2 thoughts spring to mind here, The inner drum spigot has cracked 😕 or the inner drum is twisted?

    Dunno mate other than that 😕

    Martin

    July 6, 2004 at 9:17 pm #113488
    Penguin45
    Participant

    I went to a W123 this morning, rumbling away gently it was, went to the van for the crosspiece (on special offer at the moment £21.95 +) and bolted it on.

    I went to a W123 this afternoon, rumbling away gently it was, went to the van and got another crosspeice (Cheap, bought a few you see…), took the rear cover off and was confronted by a Philco back panel………

    Just as well I still had a bearing set on board; but really! This would have caught most of us out!

    Penguin.

    July 6, 2004 at 9:47 pm #113489
    eastlmark
    Moderator

    Re: Indesit W123

    This is a typical indesit story, a model number will be identical or maybe a uk instead of a gb after it and it will be a totaly different machine.

    October 27, 2004 at 6:50 pm #113490
    Penguin45
    Participant

    I went to a W123 this afternoon, so BEFORE I went and got the crosspiece from the van, I took the rear cover off and was confronted by ….. a plastic tub!

    Thank God the computer had exploded!

    Chris.

    October 28, 2004 at 7:15 am #113491
    Martin
    Participant

    Penguin45 wrote:…. a plastic tub!

    Ah yes! the dreaded Brembate Drum, you’ll be seeing more of these in other examples if I’m any judge of Antonio Merloni 😆

    Martin

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.