zanussi zjd12191

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zjd12191

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 26, 2010 at 5:48 pm #57505
    williemac
    Participant

    Dryer runs for 10 min then switches off cleaned out dryer chamber,changed water valve,and changed sensor [toc]
    has anyone came accross this problem,or have i missed anything thanks

    September 27, 2010 at 5:58 am #331354
    martinm
    Participant

    Re: zanussi zjd12191

    check insulation on heater could well be low

    September 27, 2010 at 8:52 am #331355
    Martin
    Participant

    Re: zanussi zjd12191

    williemac wrote:has anyone came accross this problem,

    All the time, what error code is showing anyway?

    September 27, 2010 at 6:09 pm #331356
    williemac
    Participant

    Re: zanussi zjd12191

    No error code showing

    September 28, 2010 at 11:01 pm #331357
    leavemetogetonwithit
    Participant

    Re: zanussi zjd12191

    Usually green solenoid coil goes o/c after working for 10 mins or so and getting warm. This usually gives E10. However as you say you’ve changed water valve, perhaps there is some other problem around water supply e.g. low pressure or blockage?
    Mike.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.