AEG L74650 not filling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG L74650 not filling

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 29, 2010 at 2:43 pm #57586
    marlow
    Participant

    Hi

    First request for help on this forum.

    This W/M PNC 914525538/01 developed a fault that came up with E20.

    However when I called the pump was the only thing working – not in a flood mode as float resting on base – the machine not filling or no motor action even on spin. No fault codes show and the timer counts down the minutes.

    Is the machine thinking that there is water in the tub?

    Any help would be appreciated as would any service info for the beast.

    Thanks in advance

    September 29, 2010 at 4:44 pm #331673
    leavemetogetonwithit
    Participant

    Re: AEG L74650 not filling

    I seem to remember these AEG’s will pump out continuously with the door open. Was the door locking? Could be a new lock or lock+module 🙁 .
    Mike.

    September 29, 2010 at 6:51 pm #331674
    marlow
    Participant

    Re: AEG L74650 not filling

    Mike

    Thanks for the suggestion but the door does lock.

    As I said the machine has no action other than the pump running continuously.

    The water level system is not a mechanical pressure switch but appears to be electronic using a pressure tube for operation as normal. Anyone know how to check this?

    Brian

    September 29, 2010 at 8:49 pm #331675
    Seamy
    Participant

    Re: AEG L74650 not filling

    Go into service mode, fill with water & empty again.
    This seems to reset the level sometimes.
    If level is not at zero at the start of cycle it will not take in water so basically it will run pump until level is detected at zero level.
    Worth checking for blockages in drain hose pipe, sump hose etc.

    September 30, 2010 at 7:53 am #331676
    marlow
    Participant

    Re: AEG L74650 not filling

    Seamy

    Can you tell me how to get into service mode and how to come out of it?

    Thanks for the help

    Brian

    September 30, 2010 at 8:17 am #331677
    Seamy
    Participant

    Re: AEG L74650 not filling

    e-mail address pls’

    September 30, 2010 at 12:30 pm #331678
    marlow
    Participant

    Re: AEG L74650 not filling

    Seamy

    bstill(at)connectfree.co.uk

    Thanks

    Brian

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.