Siemens EH785502E/09

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens EH785502E/09

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 30, 2010 at 4:13 pm #57619
    Alanj
    Participant

    Hi Guys,
    this hob is flashing a small “e” intermittently according to customer. It seemingly happens with 2 of the rings?

    Alan

    October 5, 2010 at 3:32 pm #331750
    Alanj
    Participant

    Re: Siemens EH785502E/09

    Hi Guys, any Bosch/Siemens experts out there, I have been to this induction hob and the 2 right hand rings(same size) don’t come on at all. The controls light up and will go to 0 but then this “e” starts flashing. Hand book does not show this fault but says that any display with “Er” is related to electronics failure. Any Ideas please?

    Alan

    October 5, 2010 at 5:06 pm #331751
    nomadPaul
    Participant

    Does the ‘e’ flashing get followed by a number ? It sounds like one of the 2 main boards has gone.

    October 5, 2010 at 6:32 pm #331752
    Alanj
    Participant

    Re: Siemens EH785502E/09

    Hi Paul, I don’t think so. If there is a number it’s 0.
    Alan

    October 5, 2010 at 7:32 pm #331753
    nomadPaul
    Participant

    e0 is Main board failure mate .

    LHS – 665720 approx £137:00+ VAT
    RHS – 643954 approx £136:00+ VAT

    October 6, 2010 at 6:00 pm #331754
    Alanj
    Participant

    Re: Siemens EH785502E/09

    Thanks Paul. Much appreciated 😀

    October 7, 2010 at 12:22 pm #331755
    Alanj
    Participant

    Re: Siemens EH785502E/09

    Had a closer look at this hob today and dismantled to access electronic boards. There is a track on the board blown. I tried soldering a link accross, the ring back left worked ok but when I tried the front ring the error “e” came up again and both rings don’t work again.I assume the repair didn’t hold. Is it possible there is a fault with the front ring which has blown track on board?

    Alan

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.