AEG D100-1M

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #57645
    rickard
    Participant

    Went to look at this oven where the top oven is completly dead. I have power to the board which i suspect is the fault but on looking there is 2 boards, one is a main board very expensive and the other is classed as a display board, has anyone any opinions on which board is at fault as i dont wont to spend mega money on board i dont need.
    D8100-1M 944171162
    Many Thanks
    Andy

    #331833
    electrofix
    Moderator

    Re: AEG D100-1M

    i assume the no light on the top oven display

    from the part lists both boards are the same do a swop


    from the limited diagrams i have there seems to be a transformer on the board check the primary winding for open circuit may be a transformer failure and you may be able to source one

    had a similar fault on another cooker ended up transformer was 12v out put so used a 12 halogen transormer i had lying around to provide power to the board which prooved board was ok then found a replacemant transformer and fixed the board saving the cutomer over £70

    Dave

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.