Beko WMA765S

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA765S

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 1, 2010 at 4:37 pm #57646
    robbra
    Participant

    Hi,
    Originally called to this as the m/c wouldn’t programme and the display was only partial. Sent the main board off to EMW, it came back and the machine will… randomly
    Pumps when programme selected and not stop
    Will every time if you can get it to stop pumping…..
    Do a programme up to the fab conditioner last rinse then stop
    Not do a spin prog, a rinse prog or duo or eco prog. I just sits with the wash light on.
    I sent back the board to EMW for a retest but they confirmed it as tested ok. Valves are fine just getting no power on the last rinse. I put it back in today but still the same. I’ve never had this problem with a Beko before and it’s driving me and the customer mad.
    Has anyone any ideas?
    Thanks
    Rob

    October 1, 2010 at 5:40 pm #331834
    bazza500
    Participant

    Re: Beko WMA765S

    Hi Rob,
    Had something similar last week, and I think it was the same model. Removal company broke the knob off. I replaced the selector switch but it wouldn’t programme and just kept doing wierd things. I replaced the board but it still wasn’t right. Then put it through a test. It did that okay and then worked normally after that. Haven’t heard anything since so can just assume it is still working.

    October 2, 2010 at 9:07 am #331835
    robbra
    Participant

    Re: Beko WMA765S

    Thanks Bazza,
    Will give it a go.
    Rob

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.