hotpoint dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint dryer

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • October 12, 2010 at 8:56 am #57908
    tash
    Participant

    hi .. this condenser dryer model ctd00p keeps clicking the one shot cut out.. I’ve replaced both stats checked for blockages step down cooling and she assures me she doesn’t turn it off early.. any ideas please am I missing something obvious .. thanks

    October 12, 2010 at 9:07 am #332634
    allan73
    Participant

    Re: hotpoint dryer

    Most likely timer, might be worth checking cap’s ok first though.

    October 12, 2010 at 10:06 am #332635
    wilf
    Participant

    Re: hotpoint dryer

    I’ve had this it was the timer missing the cooling step at the end of cycle

    wilf

    October 12, 2010 at 10:36 am #332636
    tash
    Participant

    Re: hotpoint dryer

    thanks will check again when I go tomorrow..

    October 12, 2010 at 10:50 am #332637
    allan73
    Participant

    Re: hotpoint dryer

    If you’ve got a plug in energy monitor you can easily check if heaters switching off by monitoring the amps (or watts).

    October 12, 2010 at 6:52 pm #332638
    HotDog
    Participant

    Re: hotpoint dryer

    can i ask were one would get an energy monitor and at what cost sounds like a handy tool

    October 12, 2010 at 7:08 pm #332639
    tash
    Participant

    Re: hotpoint dryer

    £9.99 at maplins

    October 13, 2010 at 10:38 am #332640
    trotter
    Participant

    Re: hotpoint dryer

    Replace the heater complete with stats & you should find that will cure it……DON’T ASK ME WHY!

    But it works!

    by the way stats should be 1703200 for this one 😀

    October 13, 2010 at 12:43 pm #332641
    robbra
    Participant

    Re: hotpoint dryer

    allan73 wrote:If you’ve got a plug in energy monitor you can easily check if heaters switching off by monitoring the amps (or watts).

    Or get a clamp meter (Maplins) and you get a meter and a clamp. I’ve used one for14 years and couldn’t do without it.
    Rob

    October 13, 2010 at 3:47 pm #332642
    Martin
    Participant

    Re: hotpoint dryer

    robbra wrote:Or get a clamp meter (Maplins) and you get a meter and a clamp.

    Got to agree with Rob on this, whilst I have both devices, the clamp meter scores far better than the 13amp plug-in meter due to the simple fact you don’t need to plug it in! 😀

    October 13, 2010 at 3:57 pm #332643
    robbra
    Participant

    Re: hotpoint dryer

    Got to agree with Rob on this

    Blooming Heck 😳

    October 13, 2010 at 4:17 pm #332644
    Martin
    Participant

    Re: hotpoint dryer

    😀

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.