- This topic has 7 replies, 3 voices, and was last updated 15 years, 5 months ago by
.
-
Posts
-
production no/ 91465330901
when you put the dryer on the drum tumbles back and forward ok
but the dryer element and dryer fan don`t work
tested both with meter and they seem ok
the customer said she had E10 come up
but can`t find that code anywhere
anyone got any ideas pleaseRe: AEG l12710 w/d
water off ?
kinked fill ?
dryer fill solenoid failure?
cant drain, so wont fill?
element insulation resistance out of parameters…?e10 is user display error, not a diagnostic error code iirc, so you need to access diagnostics to find out the service error code.
pm waiting. report back soon
oh and exam later 😉
Re: AEG l12710 w/d
fills and empty is fine
so will the dryer motor + dryer element won`t come on if the dryer fill solenoid doesn`t work or if the wash element is faulty(goes through wash fine with no fault code)Re: AEG l12710 w/d
petalpop wrote:so will the dryer motor + dryer element won`t come on if the dryer fill solenoid doesn`t work
They run for 10 mins usually and then shut down with E10 when they realise they’re not getting any condensing water because the green coil’s gone o/c. (Although it may show OK when you test it cold.)
Another possibility is the dryer ntc in the tub to condenser hose (bottom of m/c) has shaken one of its orange wires to destruction.
Mike.Re: AEG l12710 w/d
cheers i will check those
when that happens does it stop the fan and the element though
- You must be logged in to reply to this topic.