bosch f21 fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch f21 fault

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 25, 2010 at 5:40 pm #58288
    hdltd
    Participant

    thanks for info replaced carbon brushes and still f21 this machine has no spin speed button so can you helpin reset test prog model number is
    wae24363 gb/05 fd number 8807
    brushes well worn down
    thanks
    john

    October 25, 2010 at 7:05 pm #333991
    Turbo
    Participant

    Re: bosch f21 fault

    To clear an F21 error , you will need to enter the test programme.

    Set selector switch to off
    Turn selector switch to 6 o’clock position
    Hold spin speed button then turn selector switch one position clockwise ( 7 o’clock )
    The machine should now be in test programme
    Turn selector switch back to off then on again and it should be back to normal

    October 25, 2010 at 7:34 pm #333992
    hdltd
    Participant

    Re: bosch f21 fault

    thereis no spin speed button on this machine
    John

    October 25, 2010 at 7:55 pm #333993
    geoff1
    Participant

    Re: bosch f21 fault

    try this link which is for gb 02 version

    http://www.ukwhitegoods.co.uk/modules.p … =bosch+f21

    But normally there is a speed reduction switch / spin speed switch

    Geoff

    October 25, 2010 at 8:29 pm #333994
    nomadPaul
    Participant

    It should be the button underneath the spin speed LED’s….or you have an incorrect ENr ?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.