Indesit WD12X UK Bearing Seal

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Indesit WD12X UK Bearing Seal

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 26, 2010 at 12:45 pm #58309
    Phidom
    Participant

    Can anyone tell me the part number for the seal on this machine? Masterpart list it as 082696 so I ordered one but It is the wrong size. Bearings are 6204 & 6205, old seal measures 30 52/65 whereas the 082696 is 35 62/75. 😥

    October 26, 2010 at 2:50 pm #334048
    cornwell40
    Participant

    Re: Indesit WD12X UK Bearing Seal

    Aqualectric wrote (way back in 2007)

    There are 2 sizes of bearings and seals. To identify which kit you need, remove the pulley and measure the shaft diameter at the outer bearing. It will be either 26mm or 22mm.
    If 26mm use bearing seal part no. 082696. The spider is fitted with 6205 and 6206 bearings. Cheapest way to buy these together is BRG6091 from Connect (AEG kit; fits 560,633,2060 etc) and use the 082696 seal. Discard the AEG seal.
    If 22mm, use bearing seal part no. 096186. This spider uses 6204 and 6205 bearings. Cheapest way is the Hotpoint kit, fits all machines pre – WMA – eg: 95, WM etc. Fit the 096186 seal and discard the Hotpoint one.

    Hope that helps 😉

    TC

    October 26, 2010 at 3:10 pm #334049
    Phidom
    Participant

    Re: Indesit WD12X UK Bearing Seal

    Thanks TC. If you see him, give my regards to Officer Dibble. 😆

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.