Tricity Bendix AW 1201W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Tricity Bendix AW 1201W

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • October 26, 2010 at 8:46 pm #58326
    A1TEC
    Participant

    Hi, guy’s could anyone forward me a service manual for the above machine. Bendix AW 1201w

    email: JMPAR@YMAIL.COM

    Thanks in advance.

    John.

    October 26, 2010 at 10:28 pm #334101
    leavemetogetonwithit
    Participant

    Re: Tricity Bendix AW 1201W

    Have sent sm and trbleshtng for AW1201W (914215108/00 – 20050624)
    Mike.

    October 27, 2010 at 6:28 am #334102
    A1TEC
    Participant

    Re: Tricity Bendix AW 1201W

    Thanks Mike much appreciated. 😀

    John.

    October 28, 2010 at 7:03 pm #334103
    A1TEC
    Participant

    Re: Tricity Bendix AW 1201W

    Can anyone tell me if the front comes of the tub to get the drum out to change the bearings on this one? 😳


    John.

    October 28, 2010 at 7:14 pm #334104
    leavemetogetonwithit
    Participant

    Re: Tricity Bendix AW 1201W

    Looks like you have to take the drum out through the top 😯 . One piece cabinet with small back panel by the looks of it. Version I’m looking at does have split drum though. But you’d need PNC to be sure.
    Mike.

    October 28, 2010 at 7:28 pm #334105
    A1TEC
    Participant

    Re: Tricity Bendix AW 1201W

    Hi Mike, the reason i ask is that the tub is welded around the middle.
    Was asking if like the old hotpoint wm series the drum pulled out the front of the tub. 😕

    John.

    October 28, 2010 at 7:42 pm #334106
    leavemetogetonwithit
    Participant

    Re: Tricity Bendix AW 1201W

    Ahem, where have you been? This issue has been discussed all over this site for the past couple of years at least. Tub and drum assembly is around £160 retail. No chance of cut and shut with these I’m afraid.
    Mike.

    October 28, 2010 at 7:47 pm #334107
    A1TEC
    Participant

    Re: Tricity Bendix AW 1201W

    Cheers for that mike, i have came across the sealed tubs in hotpoints, but not in the zanussi range. 😥

    Looks like a new machine for this customer then. 😉


    John.

    October 28, 2010 at 8:04 pm #334108
    leavemetogetonwithit
    Participant

    Re: Tricity Bendix AW 1201W

    If it’s under 2 y. o. tell her to have a moan at the retailer. (Hope that’s not you!) welded tub disaster
    Mike.

    October 28, 2010 at 8:22 pm #334109
    A1TEC
    Participant

    Re: Tricity Bendix AW 1201W

    No not me. 😀


    John.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.