- This topic has 8 replies, 4 voices, and was last updated 15 years, 5 months ago by
.
-
Posts
-
dont relay like fixing servis think there garbage. but this for letting agent.machine does cuple turns on spin, then just pumps, on rinse an a wash just fills up and sits there carbons are ok. am thinkin pcb help lads?
Re: servis m6115
check the Pcb, im sure there is a dry joint on the relay, just solder it back and it will start working again, common problem with this model,
Re: servis m6115
Think Clive’s probably right but if not have a look at tacho coil and magnet.
Mike.Re: servis m6115
if you noticed,probable the drum is turning only in one direction for about 10 seconds, then it stops, drain and cycle goes to end, this because the relay has a drain joint and the motor is not rotating on the other direction. In this case the PB will pick up the problem ad stops the cycle strait away. Just solder it back and it will work, you will see this black spot and dry joint on the pcb, very easy to spot
- You must be logged in to reply to this topic.