ZAN ZWF1430W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ZAN ZWF1430W

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 13, 2010 at 5:03 pm #58824
    LittleMan
    Participant

    Hi Customer just phoned about this machine he said that it comes up with E20 but when playing with machine it also comes up with E40 and E90 then back to E20 can any one help please Les

    November 15, 2010 at 12:35 am #335801
    aqualectric
    Participant

    Re: ZAN ZWF1430W

    E20 – drain fault.
    E40 – door interlock fault.
    E90 – communication error. (usually the blue cables between PCB main board and fascia PCB – contacts on fascia PCB (user interface) loose and oxidised. Remove plug to fascia PCB and clean edge connector; crimp plug to tighten and refit.

    HTH,

    Steve.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.