- This topic has 3 replies, 3 voices, and was last updated 15 years, 4 months ago by
.
-
Posts
-
hi has anyone got a copy of wiring diagranm for a neff 1051 built in oven the element has blown so replaced and also fitted a new bulb to check light as was told light would not work. have wired all in and both fans and bulb work but new element not heating it has about 30 ohms on the element and 240v on wiring to element with wire disconnected when coneected volage drops and element will not heat so could really do with a wiring diagram as have now mixed up all wiring.
thanks
chrisRe: neff 1051
don wrote:Hi Chris
Sorry but forum rule number 8 applies. Probably time for an engineer.
Donhi don
i am an industrial catering engineer for an electrical company can you advise where i could get the wiring diagram then please.
kind regards
chrisRe: neff 1051
Without the full model number of the appliance it’s impossible to help you. However I cannot fathom how you could possibly “mix up all the wiring?” as (usually with Neff ovens) both the lamp and fan element are accessed from inside the oven cavity. 😕
Also, some Neff oven fan elements have a 3 wire connection configuration. Could it be, perhaps, that the all important 3rd wire has fallen down behind? 💡
Beyond that and to reiterate Don’s earlier comment, we cannot provide wiring diagrams. For that you would need to contact Neff directly to see if they are able to oblige?….Sorry! 🙁
- You must be logged in to reply to this topic.