- This topic has 4 replies, 3 voices, and was last updated 15 years, 4 months ago by
.
-
Posts
-
The dryer heater comes on for a short time, then switches off. I’ve checked the condenser for blockages which is the usual problem, it was blocked, but is ok now, and the thermistor mounted in the bottom hose is clear of any debris, but still the same problem. I have gone for the thermistor being faulty. Any ideas anyone please? Cheers. Steve.
Re: Zanissi Washer Dryer ZJD 1219
Pull the orange wires on that thermistor in the bottom hose; they are notorious for snapping at the plug.
Steve.
Re: Zanissi Washer Dryer ZJD 1219
Thank you Aqua. I did check the plug and it was ok, so I have ordered a thermistor.
Re: Zanissi Washer Dryer ZJD 1219
If it’s got a three way valve with a green solenoid coil it could be that. Coil goes o/c shortly after starting up but will measure OK when you test it because it’s cooled again. Usually displays E10 when it stops. Think it was Steve who originally posted about that years ago.
Mike.
- You must be logged in to reply to this topic.