Diplomat ADP 8224 dishwasher

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat ADP 8224 dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 27, 2004 at 7:12 am #5916
    admin
    Keymaster

    My husband has just replaced the motor on this dishwasher and now the control panel does not work and it does not seem to be filling up with water. Any ideas?

    July 27, 2004 at 8:03 am #114597
    Dave_Conway
    Participant

    Re: Diplomat ADP 8224 dishwasher

    When you say the control panel doesn’t work, how does it not work ?

    No display at all, no response when buttons pushed ?

    Check for wires pulled off when the motor was fitted etc. Did it actually need a motor in the first place ?

    Please ensure the appliance is disconnected from the power supply when working on it.

    Regards.

    Dave.

    July 27, 2004 at 8:12 am #114598
    admin
    Keymaster

    Re: Diplomat ADP 8224 dishwasher

    There is no display at all and the machine does not fill up with water. I can only assume that we did need a new motor. The machine packed up a while ago (display was was working at the time) and we called an engineer who told us thaqt we needed a new motor. The engineer never returned to fit the motor so my husband adopted the DIY approach!

    July 27, 2004 at 8:51 am #114599
    Dave_Conway
    Participant

    Re: Diplomat ADP 8224 dishwasher

    If there’s no display at all the appliance is dead/no power.

    I would check the leads around the motor as one has probably been knocked off while fitting the motor.

    Apart from that, you may well need an engineer again.

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.