Electrolux induction hob

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #59299
    don
    Moderator

    Model no. EHD60020P PNC 949592819

    As soon as you select a heat level to any burner all the indicators flash F. Our thoughts are the control PCB is faulty.

    Anyone else come across this or can some kind soul look up their TDS disk please 🙂

    Thanks

    Don

    ps for Martin, my copy is at home on the other pc 😉 I must install it on this one :rolls:

    #337625
    ANDYVIVO
    Participant

    Re: Electrolux induction hob

    F usually indicates the pan is not detected, well it does on my Zanussi, so I guess this is the same? Is the pan 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} suitable for induction?
    Andy

    #337626
    don
    Moderator

    Re: Electrolux induction hob

    Good shout Andy 😀

    I got customer to bring in one of the so called inductive pans and guess what they were alloy.

    Customers excuse “just moved into the house, the previous owners told us you can use any pan.” Needless to say a little education was required and told new owner to RTM.

    Don

    #337627
    Seamy
    Participant

    Re: Electrolux induction hob

    Test pans with a magnet, if it sticks they’re o.k

    #337628
    don
    Moderator

    Re: Electrolux induction hob

    Thanks Seamy but I didn’t need my trusty speaker magnet for those pans you could tell from a mile off they were alloy :rolls:

    Don

    #337629
    don
    Moderator

    Re: Electrolux induction hob

    Round 2 on this one :rolls:

    On the rear left plate, heat can be increased fine by using the plus symbol but will not reduce when the minus option is selected.

    Any pointers anyone.

    Don

    #337630
    ANDYVIVO
    Participant

    Re: Electrolux induction hob

    Could be the glass is dirty on the underside, or they are not pointing there finger at an angle, long nails per chance? Another thought is there a halogen bulb on a hood? Might affect the operation. Failing those then module. Hth, Andy

    #337631
    don
    Moderator

    Re: Electrolux induction hob

    Thanks Andy,

    I should have said hob is in our workshop 😳 glass underside has been cleaned, we all have nicely manicured nails (not) and no over head halogen lighting. So that leaves the module then I presume 🙁

    Don

    #337632
    bigchrisoioi
    Participant

    Re: Electrolux induction hob

    honeslty!!…waste of time induction hobs……i bet most Engineers have basic washers, non frost free fridges,non condensing dryers, gas hobs and basic control fan ovens!!……the public have too much money !….why complicate things is what i say….mind u the missus is getting up with the wringer and the hoovermatic twin tub!!

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.