- This topic has 4 replies, 4 voices, and was last updated 15 years, 4 months ago by
.
-
Posts
-
Got one showing F2E, any ideas what that is please. It happens sometimes on main wash or on final rinse
Thanks
Andy
Re: Miele G7859
It seems that the water is coming in ok and filling up to the level clayside, i kinda thought it may be something to do with the temp maybee not heating up as quickly as it should
AndyRe: Miele G7859
f2e is water fill fault… the g7859 does not always have the same fill configuration between hot and cold,as it has both fill waterproofs on it… and it fills with different ones at different times ,but not always the same from cycle to cycle…..
i would suspect the cold fill waterproof is failing,as the machine is predominantly hot fill at the beginning of the cycle…..
f2e is shown if the required level is not reached after 5 mins..Re: Miele G7859
“F2E – When water intake has not been completed within the overriding time control of 5 mins, the program is interrupted”
If the hot supply is intermittent this can knock the machine out – use a y-piece and put hot and cold hoses off the cold supply only. Normally though, if you get an F1E, F2E or F3E and the water supply is OK and filters are clean, I normally change out the heating level control switch – part nr 4441514.
Cheers!
- You must be logged in to reply to this topic.