winterhalter – GS29

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › winterhalter – GS29

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 7, 2010 at 4:01 pm #59413
    jackster
    Participant

    Hi all,
    A friend of mine has got a winterhalter GS29 Glasswasher. It has a problem in that it washes ok, go’s through the cycle and finishes but if you close the door again it keeps heating, you can actually here it, the heater is obviously sticking on. Any ideas? Or anyone fancy the job, its in CV10 area.

    December 7, 2010 at 4:09 pm #338115
    A1TEC
    Participant

    Re: winterhalter – GS29

    Stat could be faulty or pressure switch sticking, had plenty with sticking pressure switches due to air chamber being blocked.

    John.

    December 7, 2010 at 4:13 pm #338116
    jackster
    Participant

    Re: winterhalter – GS29

    A1TEC wrote:Stat could be faulty or pressure switch sticking, had plenty with sticking pressure switches due to air chamber being blocked.
    John.

    Sorry for my ignorance but were are the pressure switches on these, how do i get to it?

    December 7, 2010 at 4:20 pm #338117
    A1TEC
    Participant

    Re: winterhalter – GS29

    Usual place is in the top of the machine, front control panel slides out or pop the lid off.

    John.

    December 7, 2010 at 9:45 pm #338118
    jackster
    Participant

    Re: winterhalter – GS29

    Cheers mate, ill have a look tommorow.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.